PDA

View Full Version : oil pressure



TXGS
01-31-2007, 10:05 PM
I want to get a concensus on your oil pressures.

When your car is at temprature and your car is in gear at idle what pressure are you seeing.

Thanks:TU:

Mike Atwood
01-31-2007, 10:46 PM
20psi if it's really hot out, 25psi if it's mid 60's outside........ in drive at 650-700rpm

TXGS
01-31-2007, 11:23 PM
Thanks mike. Do you happen to know how tight your clearences are. Rod, mains and oil pump.

71stage1conv
02-01-2007, 08:17 AM
You need to check the oil temp while reading the pressure too. In case you're not aware, the oil takes a lot longer to get up to running temp compared to the coolant. And the obvious, the pressure will fall off some as the oil temp increases.:ROLL:

Mike Atwood
02-01-2007, 08:48 AM
Thanks mike. Do you happen to know how tight your clearences are. Rod, mains and oil pump.

It's been a while since the bottom end has been apart, but I think I ran the oil pump at .003 ...... The kit I had, had different gaskets with different thicknesses if I remember correctly.
The Mains were set at .0010 and the rods at .0015 if I remember correctly.:TH: