m900rider
05-02-2007, 10:21 AM
My name is Paul (Jody) Plummer and I would like to thank you for taking a look at my valve covers.
The inspiration for these came from my desire to speed up the process of adjusting valves between rounds at the race track while also dressing up the engine bay with something a little different via the fabricated TIG welded look.
These are two peice design in which a base flange with an O-Ring seal is permanently sealed and mounted to the cylinder head using the stock Valve Cover bolt hole locations.
Check out the attached photos.
I am asking $385 for the set plus shipping. I am located in Coeur D Alene, Idaho which is about 30 miles from Spokane, WA.
Here is my phone and email:
208-691-6394, m900rider@hotmail.com
They Feature:
Unique O-ring seal means you will never compromise a gasket surface again
Fastener locations engineered to optimize compression to minimize oil leaks
Fast lead screws require less than half the turns over stock ¼-20 fasteners
Captive screws quickly align covers for lightening quick installation
Race inspired and race proven design
Excellent for the Racers, Street cars and Dyno Mule Test Motors
Additional Features:
3-D Solid Modeled for a perfect fit.
CNC Milled Billet Aluminum Flanges
TIG Welded Fabricated Design
Reusable O-Ring Style Rubber Gasket
Fast Lead (Quick Turn) Captive Fasteners
4” tall design to clear high lift roller rockers
5052 Polished Aluminum Finish
Please Note: Breathers are not included. Valve covers are sold with a solid top; drilling is required to install breathers.
Design is proprietary intellectual property of Custom Sourcing Solutions, LLC, any reproductions prohibited without the express written consent of Custom Sourcing Solutions, LLC.
The inspiration for these came from my desire to speed up the process of adjusting valves between rounds at the race track while also dressing up the engine bay with something a little different via the fabricated TIG welded look.
These are two peice design in which a base flange with an O-Ring seal is permanently sealed and mounted to the cylinder head using the stock Valve Cover bolt hole locations.
Check out the attached photos.
I am asking $385 for the set plus shipping. I am located in Coeur D Alene, Idaho which is about 30 miles from Spokane, WA.
Here is my phone and email:
208-691-6394, m900rider@hotmail.com
They Feature:
Unique O-ring seal means you will never compromise a gasket surface again
Fastener locations engineered to optimize compression to minimize oil leaks
Fast lead screws require less than half the turns over stock ¼-20 fasteners
Captive screws quickly align covers for lightening quick installation
Race inspired and race proven design
Excellent for the Racers, Street cars and Dyno Mule Test Motors
Additional Features:
3-D Solid Modeled for a perfect fit.
CNC Milled Billet Aluminum Flanges
TIG Welded Fabricated Design
Reusable O-Ring Style Rubber Gasket
Fast Lead (Quick Turn) Captive Fasteners
4” tall design to clear high lift roller rockers
5052 Polished Aluminum Finish
Please Note: Breathers are not included. Valve covers are sold with a solid top; drilling is required to install breathers.
Design is proprietary intellectual property of Custom Sourcing Solutions, LLC, any reproductions prohibited without the express written consent of Custom Sourcing Solutions, LLC.