cnc'd track elimanator heads
I decided to move this over to this thread area do to the fighting going on in the bench. this is just the start of what we are going to work on I you have a set of SE heads stage 1 or 2 and would be interested in a cnc program done on them contact me and we can discuss the details of doing it. this is what we got with the track elimanator head.
We have put together a cnc program for the TA stage 2 track eliminator head. We can do your head or get you new ones. This is what you can expect from them once you get them.
Both intake and exhaust will be cnc ported
Competition valve job
Combustion chambers will be full cnc'd
Heads will be surfaced to your needs for compression.
Flow numbers are as follows
Lift/Int/Exh
.100/ 74 / 61
.200/158/116
.300/222/165
.400/292/235
.500/339/254
.600/364/258
.700/374/263
.800/379/266
4.350 Bore, 28" Test Pressure. 2.260/1.755 Valves
All of this for a special price of $1,000 until April 9th then the price goes up to the normal price of $1150.00.
This can also be order from competition components at the same price.
To get this price just say that you read it on here.
Attached Images
Bobb Makley
proud member of
Finishline motorsports
Reply With Quote
