ANOTHER 350 PROJECT

[gsjohnny]

THIS THREAD IS PROPERTY OF GSJOHNNY AND THE BPG.

after some deliberation on what my next 350 project is. i've have decided.

stay tuned.

[Sean Buick 76]

Come on!!!!!!! You have to give us more to go on!!!!!!!!!!!!

[gsjohnny]

for those who are curious the clue is;

can't get enough of the 350's....

the answer is ____ __ ____ ________. fill in the blanks.

[Sean Buick 76]

So you are going to connect two Buick 350s together with one trans! What you gonna put that in???

[cacmanjr]

Uh Oh......Dr. Frankenstein is back in the lab!

[cacmanjr]

192FEDJGroller.JPG

[John Csordas]

I see a disaster in the making! Make sure your helmet is on tight!

[cacmanjr]

I see a disaster in the making! Make sure your helmet is on tight!

I think his helmet has already been too tight!

[gsjohnny]

I think his helmet has already been too tight!

wait till we put you in car....

[cacmanjr]

wait till we put you in car....

Does it come in an extra large?

[techg8]

call it the Bat-mo-bile

350 powered of course

[71GSX455-4Spd]

"TV Johnny Ivo"

I think you should use (4) 350's....

[gsjohnny]

you guys are tough. i may try once or twice, but john will probably drive it. and the budget only accounts for 2 engines. will work out the bugs with one engine while building the second engine and hardware to install it. damn safety cloth items will cost almost as much as another engine.

[gsjohnny]

thanks to john everett, it was delivered last night. it's nice. have to check it all over and see what i need to fix or change and then on to the fun. we are going to start small, aka v6 we have, just to get use to everything and then the 350. all while i'm building another 350 which will takes back to square one.

the definition of owning a boat is "break out another thousand". it will be the same.

[gsjohnny]

i sat in it today to see how it feels. nice and snug. i know the whoa and go pedals will have to be move. previous owner must have had small feet. lol
i was looking around last night for sbc zoomie headers. starting at $700 and up. yikes! i will be making my own for a lot cheaper.