Power Steering Line Needed

[Marco]

I just noticed one of my lines is leaking - just in time for the 450 mile drive to Columbus.

Anyone have a line, or know where I can get a correct line? It's the line that goes in the back of the pump with the 'press-on' fitting. The other end goes to the front of the steering box.

Thanks in advance!

[Duane Heckman]

Marco,
I believe that is the low pressure line. You could use a piece of regular hose and some hose clamps to get you by.
Duane

[Marco]

Marco,
I believe that is the low pressure line. You could use a piece of regular hose and some hose clamps to get you by.
Duane

It's the high pressure hose

PEP Boys had it. The 'non-90' degree end was not bent exactly the same as mine, but I took it home and took a chance. It doesn't fit under the pump Damn generic GM parts

Another local auto parts can order one for me - they should have it in the morning. Who knows what this one will look like?

Worst case, I use hose clamps, or attempt to 'bend' the one I bought at PEP-BOYS.

I even called Richie, but he said he really wouldn't trust the ones he had, but I was welcome to it.

[Marco]

Dodged that bullet!

The new (made in Mexico) part fit with a little 'massaging' around the steering box bend.

Good to go! See everyone, God willing, tomorrow.